=======================Electronic Edition========================
RACHEL’S HAZARDOUS WASTE NEWS #174
—March 28, 1990—
News and resources for environmental justice.
——
Environmental Research Foundation
P.O. Box 5036, Annapolis, MD 21403
Fax (410) 263-8944; Internet: erf@igc.apc.org
==========
The Back issues and Index
are available
here.
The official RACHEL archive is here.
It’s updated constantly.
To subscribe, send E-mail to rachel-
weekly-
request@world.std.com
with the single word SUBSCRIBE in the message. It’s free.
===Previous Issue==========================================Next Issue===
HAZARDOUS WASTE INCINERATION IN
CEMENT KILNS: ‘RECYCLER’S’ PARADISE.
The federal Resource Conservation and Recovery Act (RCRA) is
supposed to regulate the generation and disposal of hazardous
chemical wastes “from cradle to grave.”
Unfortunately, Congress built a feature into the law that EPA
(U.S. Environmental Protection Agency) has turned into a
loophole. Today, enormous quantities of hazardous waste are
escaping regulation through this loophole. Specifically, Congress
exempted “recycled” chemical wastes from control under RCRA, and
EPA ruled that chemical wastes burned as fuel in industrial
boilers, industrial furnaces, aggregate kilns and cement kilns
are being “recycled” and are thus exempt from RCRA regulation.
According to Richard Fortuna, director of the Hazardous Waste
Treatment Council (an incinerator industry group in Washington,
DC), 50 billion pounds of chemical wastes are being burned in
unregulated boilers and kilns each year, compared to only 5
billion pounds (or less) being burned in RCRA-regulated hazardous
waste incinerators.[1]
A recent report from Greenpeace describes the burning of chemical
wastes in aggregate kilns and cement kilns. Page numbers in our
text, below, refer to this report, SHAM RECYCLERS, PART 1:
HAZARDOUS WASTE INCINERATION IN CEMENT AND AGGREGATE KILNS.
Cement is the raw material from which concrete is made. In a
cement kiln, powdered limestone and clay are burned at high
temperatures to form a “clinker” that is later ground into a fine
powder, which is cement; when water is added to this powder, it
hardens. Certain “aggregates” can be added to cement to make
mortar, plaster, concrete or other similar materials. As with
cement, aggregates are formed by firing them in a hightemperature
kiln. Thus aggregate kilns and cement kilns seem ready-made for
destroying hazardous wastes. They have to be heated to high
temperatures with fuel, so why not substitute hazardous wastes
for part of the fuel and burn up the wastes while making
aggregate or cement? Save on fuel and destroy wastes–what could
be better? This was the question Greenpeace’s Science Director,
Pat Costner, and her colleague Joe Thornton, set out to answer.
There are at least 24 cement kilns and 17 aggregate kilns in the
U.S. burning hazardous wastes today (listed on pgs. 31-33).
Together, they burn approximately 3 billion pounds of hazardous
wastes, and a recent industry analysis says this amount could
double between 1989 and by 1992 (pg. 8).
It is difficult to obtain data on destruction of wastes in kilns
precisely because kilns are exempt from RCRA; kilns are not
required to meet the permit requirements of regular hazardous
waste incinerators, nor are they subject to the operation and
emissions standards that control regular hazardous waste
incinerators. So long as a company claims to be using hazardous
waste as a fuel or as a raw material, they are classified as
“recyclers,” and there is essentially no review process within
EPA to check their claims or their operations. Thus a fraudulent
company, bent on unregulated waste disposal, has an easy time
exploiting this exemption within RCRA. Marine Shale Processors in
Amelia, Louisiana, which was recently closed down by EPA after
national TV threw a spotlight on them, is a notorious example of
a fraudulent waste hauler disguised as a kiln operator.
Even when the intention is not to defraud, destruction of wastes
in kilns is highly questionable. As Costner and Thornton make
clear, there are about a dozen good reasons for wanting to
prevent wastes from entering kilns. Here are some of them:
Typical wastes burned in kilns include paint, ink, and coatings
manufacturers’ wastes, spent halogenated and non-halogenated
solvents generated by a wide variety of manufacturing processes,
still bottoms from solvent recovery operations, petroleum
industry wastes, and waste oils including crankcase oil,
transmission fluid, hydraulic and compressor fluids and coolants.
Typically, 1.35% of these wastes are metals (including cadmium,
arsenic, chromium, lead, mercury, zinc, and thallium). If 1.35%
seems like a small amount, remember that 1.35% of 3 billion
pounds is 40.5 million pounds of metals. Metals make trouble in
incinerators–they are not destroyed but instead pass through the
furnace into the outside environment, often in forms that make
them more dangerous than when they first entered the kiln (e.g.,
attached to fine [extremely small] particles that can readily
penetrate human lungs or can leach into groundwater) [see RHWN
#131, #132, #134,
#136, and #162].
Kilns burning hazardous wastes emit 66% more particles (soot,
smoke, haze) than kilns burning normal fuel. Kilns burning
halogenated wastes (containing chlorine, bromine, fluorine or
iodine) emit 203% more particles than kilns burning normal fuel
(pgs. 12, 26). This increased production of particles provides a
pathway for metals to escape the incinerator in a form that is
particularly dangerous to humans. The metals become attached to
the outside of the fine particles and thus become available for
humans to breathe. Costner and Thornton estimate that some 2
million pounds of metals may leave kilns attached to fine
particles each year (pg. 23). Measurements at one kiln in
California indicated it was releasing 15,000 pounds of metals
into the local environment via airborne particles each year;
measurements at a Florida kiln revealed airborne releases of
21,000 pounds of metals per year (pg. 23). Tests at an Illinois
kiln revealed that burning hazardous wastes increased lead
emissions 82%, chromium 167% and zinc 662%, compared to the same
kiln burning normal fuel (pg. 23).
The fly ash from kilns is loaded with metals if the kiln burns
hazardous wastes. Based on EPA data, Costner and Thornton
estimate that 18.6 million pounds of metals enter the U.S.
environment in fly ash from kilns each year (pg. 25). These
metals are in a particularly leachable form, having a large
surface area, and are thus available to enter water and living
things (see RHWN #162). The high alkalinity (high pH) of kiln ash
makes kiln ash even more leachable than ash from normal hazardous
waste incinerators (pg. 25). At least two ash disposal sites for
cement kilns are on the Superfund list, and neither kiln is
supposed to have burned hazardous waste (pg. 25).
Advocates of hazardous waste incineration in kilns often claim
that kilns destroy 100% of the wastes entering the furnace.
Unfortunately, available data reveal this is not true by a wide
margin. Kilns do operate at high temperatures (2000 to 3000
degrees Fahrenheit), but metals are not destroyed at any
temperature. Furthermore, a class of chemicals called “products
of incomplete combustion” (PICs, which include dioxins, furans,
and a broad range of other organic chemicals) are created in a
kiln, not in the furnace itself but in lower-temperature parts of
the machine (smoke stack, pollution control devices, or ambient
air outside the incinerator) (pgs. 18-21, 27-30).
The production of PICs is enhanced by “upsets,” which occur in
kilns several times each month, when something goes wrong with
the machine. During these periods, puffs of hazardous chemicals
are emitted into the local environment (pg. 18).
Another source of problems may be chemical releases resulting
from transportation accidents. A typical kiln will burn 1,800
tank-truck loads of hazardous wastes per year. Many such trucks
operate dangerously, in violation of applicable laws (pg. 18).
–Peter Montague, Ph.D.
===============
[1] Personal communication March 19, 1990, from Richard Fortuna,
executive director of Hazardous Waste Treatment Council,
Washington, DC; phone (202) 783-0870.
Get: Pat Costner and Joe Thornton, SHAM RECYCLERS, PART 1:
HAZARDOUS WASTE INCINERATION IN CEMENT AND AGGREGATE KILNS
(Washington, DC: Greenpeace [1436 U Street, NW, Washington, Dc
20009; phone (202) 462-1177], November, 1989). Greenpeace asks a
$5.00 donation to cover printing and handling costs. Well worth
the price.
Descriptor terms: rcra; epa; cement kilns; hwtc; hazardous
waste; merine shale processors; ash; heavy metals;